Vacuum Infusion Line Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and effective tool for clamping off resin inlet or outlet lines during the vacuum infusion process
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 117
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This vacuum infusion line clamp was designed to be simple to print and use. Each clamp features two ergonomic handles, large enough to give you a good grip, that are turned in tandem to tighten or loosen the clamp. All parts are comfortably printable without the need for supports, with each clamp costing on the order of $2 in filament.
The stl files provided load into your slicer already in the intended print orientation. For the sake of maintaining sufficient strength, I printed my own clamps with 4 perimeters, 6 top/bottom layers, and 15% infill, though you are of course free to use whatever print parameters you think will work.