Drip Tray for the Elegoo Saturn 3 Ultra
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A vat to protect your printer and workspace from resin drips (while draining) fitted for the Elegoo Saturn 3 Ultra
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 120
- Makes
- 0
- Views
- 542
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
When detaching the builtplate from the printer or while hanging it to drain, the plate or the model often hangs outside of the resin vat and drips onto the printer or the workspace. To deal with this issue this additional vat can be place on top of the original and enlarge the area to catch drips.
Because of it's size the vat is split in two with the option to connect them through pins and CA glue. (If you have the capacity (ca. 435mm x 245mm), feel free to print the model whole.)
Since it is not under any mechanical stress I choose those print settings:
Layer hight: 0.2mm
Wall thickness: 0.4mm
Wall count: 1
Top / bottom thickness: 0.6mm / 1mm
Infill density: 5%
Infill patern: Gyroid
Support: tree - normal