Wheelbarrow Flower Pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bring a miniature touch of countryside charm to your space with this 1:10 scale wheelbarrow planter!
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 51
- Makes
- 0
- Views
- 177
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Assembly
You will need one M3x12mm hex bolt for the wheel.
To attach the tub, the optimal choice is countersunk M3 bolts up to 7mm in length. However, a regular M3 hex bolt (up to 6mm in length) will also work. (Note: Countersunk bolts are measured by their total length, while hex bolts are measured by the threaded part.)
Pay attention to the legs—one side has a small cutout that must face the outside of the handle. There is a left and a right side, but there are no markings.
The same applies to the handles regarding that there is a left and a right side.
Look closely and I'm sure you'll figure it out.
Printing Options
The wheel can be printed as a single piece or split into multiple parts for multi-color or multi-material printing.
Printing Tips
The tub can be a bit challenging to print with perfect visual quality. To achieve the best results, consider using a lower layer height, optimizing your print speed, and ensuring adequate cooling.
I printed mine with PETG, 0.2mm layers and with no supports.
.