1 / 3
Catapult rubber band powered
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this for a physics lab on projections. Sorry for the 3D viewer, not sure why it doesnt work.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
For this catapult you need 2 rubber bands, 4 screws, ideally 3.5 mm, and metal rod (diameter: 3.5 - 4 mm, length: 9 cm)
I had a wierd screws so I modeled similar sized hole and jammed it in.
If you have standard 3.5 mm screws. You can use model “Catapult part_2 3.5 mm”.
Fell free to improve and remix this project.😊
Parts needed:
2 rubber bands
4 screws (ideally 3.5mm)
Metal rod (diameter: 3.5 - 4 mm, length: 9 cm)
Supports:
No
Printer:
Bambu Lab A1
Infill:
15%
Filament:
Aurapol PLA White