Modular CO2 Cylinder Organizer for Sodastream
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular way to store your carbonate water(Sodastream, Drinkmate, etc.) CO2 tanks.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 37
- Makes
- 1
- Views
- 299
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Designed this to be a modular way to store the CO2 canisters for a sodastream. I happen to have an odd number and have debated whether to store them horizontally on a shelf or vertically on the floor and this system can do either at any number!
There are three pieces to the print, the main body, a cap end, and a clip. The cap end slots onto the four posts of the main body and clips can be used to assemble several together. There is space for a clip to connect on both the body and the cap(I used one on each end for stability_.
The tolerances are such that everything hold into place reasonably well when printed with a 0.6mm nozzle, however I recommend using a little glue, soldering iron, or 3D printing pen to fix the clips into place.
Otherwise, everything was able to be printed without supports.
| Slicer: | OrcaSlicer |
| Filament: | Orange Inland High Speed PLA+ |
| Nozzle: | 0.6 mm |
| Printer: | Flashforge Adventurer 5M Pro |
| Supports: | None |