Multiboard Tile X Brace (for freestanding base - 9x9 grid)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brace to prevent freestanding multiboard tile from wobbling
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 0
- Views
- 231
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I found my freestanding multiboard setup to wobble too much when loaded with tools so I made a cross-brace to fix it.
If there is interest I will make a parametric version for different size tiles, but this is 9x9 tile size (spans 7x7 square, allowing for perimeter rows that you need for the free-standing feet and tile connectors).
Attaches via part A of 2 double sided snaps so then you can use part B and still have a usable slot in your multiboard. Lay the board flat on a table, put the brace on top and press in. It will be a tight fit.
If you like my designs, consider popping a tip on https://ko-fi.com/valentineinstruments - it helps out a lot!