1 / 3
Caulk Saver Caulking Tube Insert
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cap for an open tube of caulk, grease, cement, tar, asphalt, adhesive, silicone, expanding foam, etc. !
- Rating
- 4 / 5
- Likes
- 55
- Downloads
- 339
- Makes
- 2
- Views
- 1,050
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Share Alike
This is a 3D printed part similar to commercially available caulk tube sealers.
Have you ever used caulking or some other sealant gun / cartridge gun tube material, but didn't need the whole tube? This part will screw into the open end to seal the remaining material for future use!
Recommended print settings:
- Material: PLA / PETG
- Layer Height: 0.2 mm or less
- Infill % : 50+
- Supports: No
- Print Orientation: Default as modeled
- Brim: Optional