Brake adjuster strengthener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Strengthens the adjustment screw. No more collapsing
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Share Alike
Background
on most wired bike brakes, there is one adjustment screw on the handle. In my exerience these can bend or collapse and then the threads do not engage anymore. your “reach of adjustment” is then limited.
While I generally see the purpose of this slotted design, I see above situation as a bigger drawback than the following solution.
Solution
this part is inserted in the screw and fills out the slot.
Geometry
the provided part is for an adjuster with a 6mm inner diameter. It is 12mm long.
the brake wire is usually 1.5 mm thick.
Use/remix
Scale/Cut/Remove in the slicer if your dimensions vary.
you can also remix from here: Onshape
Parts A/B are a cut version of the other one. Those can be used on existing installations.