Hailo Griffleiste Tandem, Multi-Box duo L
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Griffleiste / Frontblende für Hailo Ausziehmülleimer.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 1
- Views
- 90
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Replacement handle strip for a HAILO pull-out waste bin.
Part number: 1091389 (cream white), 1059429 (graphite gray).
Available for purchase at HAILO: https://www.hailo.de/de/shop/p/griffleiste-1125319
The model lies flat (horizontally) on the front side, making it easier to print (and more appealing visually).
Update: Durability is better when printing as oriented.
Printing:
Material:
ABS (can be printed vertically with a heated chamber; otherwise, print horizontally to avoid warping).
PLA (orientation does not matter).
Supports:
Enabled (e.g., zigzag).
Layer Height:
Your choice.
Infill:
100%
Required mounting materials (optional, as the handle strip clamps well even without riveting):
2x blind rivets with a wide flange (3.2 x 8 mm).
Rivet pliers.
Ersatz für die Griffleiste eines HAILO Ausziehmülleimers.
Teilenummer: 1091389 (cremeweiß), 1059429 (graphitgrau).
Zu erwerben bei HAILO: https://www.hailo.de/de/shop/p/griffleiste-1125319
Das Modell liegt flach (waagrecht) auf der Vorderseite, so ist es einfacher zu drucken (und die Optik ist netter).
Druck:
Material:
ABS (mit beheiztem Bauraum senkrecht druckbar, sonst wegen Warping waagrecht).
PLA (Orientierung egal)
Supports:
an (z.B. Zickzack)
Layer Height:
Nach Wahl, je nach, wie glatt die Front bei vertikalem Druck sein soll.
Füllung: 100 Prozent
Benötigtes Montagematerial (optional, da Griffleiste auch ohne Nietung gut klemmt)
2x Blindniet mit breiter Krempe, 3,2 x 8)
Nietzange