1 / 4
Resmed AirMini connector to any mask — image 1
1 / 4

Resmed AirMini connector to any mask

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This adapter allows to connect AirMini with humidifier to any mask that has 22mm connector. Use with you own risk.

Rating
0 / 5
Likes
10
Downloads
115
Makes
0
Views
443
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Print upright - no supports needed - I printed with ABS - part cooling is necessary for the flanges to print properly. In multi material printers it might be good idea to print the tube connector (female) part with TPU and rest with ABS. I do not recommend to use PLA. PETG might also be good - I used only ABS. Note that to make proper seal, small O-ring shall be stretched on the base of the connector. O-ring is about 1mm thick and 15mm diameter. 

NOTE: The model cad/stl is optimized for ABS shrinkage, no scaling needed if printed in ABS, other filament types - print and test.

USE OF YOUR OWN RISK

Tags