M104 resonance flap blanking plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Blanking plate for resonance flap on the original intake manifold
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
DISCLAIMER: USE AT OWN RISK!!!
Test fit first before screwing in all the way. If tolerances of your printer aren't right you WILL break some screws
Part is supposed to use the original brass inserts of the resonance flap, you have to take the flap apart OR you can use washers to suit the purpose.
Print settings:
Material: ASA (needs to be oil and heat resistant)
Build plate: anything FLAT (non structured)
Bed temp: 112C
Nozzle: 267C
Speed: 60mm/s
Nozzle size: .4mm, .3 layer height
Perimeters and solid layers: 3 perimeters, 8 bottom layers, 3 top layers
I recommend sanding the bottom
p.s. might make a servo operated version in the future, I'm pretty sure the effects of this flap are negligible tho
EDIT: after testing this I no longer want a servo version. The gain in throttle response and smoothness is worth it.