Prusa Core One Webcam Mount for Logitech C920/C930 (for 6x2mm magnets)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.56 – €0.69 net (excluding VAT)
For file: core-one-c920-mount-remix_0.4n_0.2mm_PETG_COREONE_36m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 36 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mount for a Logitech C920/C930 webcam for the Prusa Core One using 6x2mm magnets
- Rating
- 5 / 5
- Likes
- 72
- Downloads
- 298
- Makes
- 10
- Views
- 1,849
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Requires six 6x2mm magnets
Refer to https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077 to disassemble webcam to replace with mount
In order to guide the USB cable from the top down you will need to disassemble the frame to fit through the hole at the front directly below the camera
The cable will be guided through the same holes use for the Buddy Cam as seen here:
https://help.prusa3d.com/guide/buddy3d-camera-for-core-one-installation_405529#862344