Elegoo Centauri Carbon Low Friction Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I really like the low friction spool holder for my A1 Mini and wanted a similar one for my new Elegoo Centauri Carbon.
- Rating
- 5 / 5
- Likes
- 102
- Downloads
- 785
- Makes
- 5
- Views
- 3,963
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I really like the low friction spool holder for my A1 Mini and wanted a similar one for my new Elegoo Centauri Carbon. I remixed some great designs into a low friction mount that will do the job. All parts can be printed on the Centauri Carbon and then assembled to replace the stock spool holder.
Features
- This is a drop in replacement for the stock Centauri Carbon Spool Holder
- Assembly is straightforward
- The bearings are able to be printed in place
- Supports don't need to be enabled
Instructions:
- Print all the parts.
- Remove stock spool holder from Centauri Carbon.
- Remove two small break-away supports from the portion of the spool holder rod that will be inserted into the side panel of the Centauri Carbon.
- Insert the bearings into the spool holder sleeve.
- Slide the bearings and sleeve over the spool holder rod.
- Screw the end cap onto the rod. This is reverse threaded so spin opposite direction of normal threads to tighten. (counter-clockwise, anti-clockwise, “lefty tighty”)
- Install assembled spool holder onto Centauri Carbon by turning counter-clockwise, anti-clockwise, “lefty tighty."
-3MF file for Elegoo slicer included. Print by object is enabled and some objects are different than the default settings.
-Recommended print settings are .16 layer height, 3 walls, 25% infill. I recommend 100% infill on the threaded rod cap.