1 / 2
ZeroG electronics DIN Fysetc Spider
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the ZeroG DIN mount for the Fysetc Spider; mine is a v3 but this should work for others too.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Below is copy/paste from the source model.
---
BOM
- 4* M3 heatset inserts
- 4* M3x6 or M3x8 screws (BHCS or SHCS)
Printing settings
Would recommend using ABS or PETG to allow the part to flex without breaking. Some PLA+ might do the job.
No support needed. Use Mercury One print recommendations.