Lid Keeper for Yeti Flask
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is to hold the cap to a Yeti flask so that you don't drop it or lose it.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
I bought my wife a Yeti flask, sight unseen. Unlike seemingly every other flask in existence that has a little built in hinge to keep you from dropping and/or losing the lid, the Yeti flask does not have that. This is my effort to fix that design oversight.
I printed using Overture TPU on a Prusa MK4s with no supports, and an unheated bed on a garolite bed sheet. I used the Prusa Generic Flex preset defaults, except for the bed temp. Got a slight bit of stringing on the interior of the ring part, but nothing that can't be removed after printing.
With a little bit of effort the brim on the cap can be inserted into the ring after printing, and the cap should turn relatively easily. A little bit of sillicone lube on that part will help it turn more easily. I put fuzzy skin on the outside surface of the cap for a bit of extra grip.
Open to comments/criticisms, but this is my first design, so be gentle. ;)