1 / 2
T-Fal Vegetable Knife Replacement Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handle broke on this knife, made a replacement.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Requires an M4x12 FHCS and an M4 nut. (Ideally in some sort of stainless steel.)
Reminder: knives are sharp - a catastrophic failure of this print could cause serious injury!
Recommended material: ABS, so it can survive in a dishwasher.
Print settings considerations:
- lots of perimeters (I used 8)
- high infill (I used 40%)
- print hot and not too fast to maximize layer adhesion
- seam alignment to the rear