1 / 7
Johnny Ray Swivel Top Garmin Striker/EchoMap — image 1
1 / 7

Johnny Ray Swivel Top Garmin Striker/EchoMap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

They don't make a swivel top large enough for my Garmin Striker/EchoMap 9", I created a larger version of the Swivel…

Rating
0 / 5
Likes
4
Downloads
18
Makes
0
Views
369
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

They don't make a swivel top large enough for my Garmin Striker/EchoMap 9", I created a larger version of the Swivel Top. Mine allows it to be completely Parallel to the Base, unlike their design, which always has if off center.

No Swivel Version https://www.thingiverse.com/thing:4255043

NOTE-READ: I found the post to break on the inside of the lip with PETG when the boat was in the waves at 20% infill. I did not try 100%, I just decided I did not need it to swivel and came up with this design instead, it fits the same hole pattern. https://www.thingiverse.com/thing:4255043

The POST IS A PRESS FIT. I mean PRESS, use little oil and your body weight and press it into a piece of carpet or rubber, it may take a few attempts to push it in all the way. It should look just like the picture. Make sure it is straight before you press it in.

SEAMS: Ensure they are NOT ALIGNED

Post: Adjust for Elephant Foot 0.3mm

Pilot Holes for #8 Screws

ARROW towards the User

Swivel Top 3 Perimeters, 3 Top & Bottom layers, 20% infill

Post 5 Perimeters, 5 Top & Bottom layers, 100% infill

Base Spacer 3 Perimeters, 3 Top & Bottom layers, 30% infill

Johnny Ray JR-300B https://smile.amazon.com/Johnny-Ray-JR-300B-Marine-Sonar/dp/B001GJ35L0/ref=lp_3447398011_1_7?srs=3447398011&ie=UTF8&qid=1585764123&sr=8-7

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

**Rafts:**

No

Supports:

No

**Resolution:**

0.2

Filament: Sunlu PETG Black

Category: DIY

Tags