Clipsal Mechanism Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A single mount for Clipsal Mechanisms.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 104
- Makes
- 0
- Views
- 537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a simple model to house the Clipsal range of mechanisms such as ethernet jacks, HDMI ports, USB and other supported connectors or switches. It does not utilise the clips on the mechanisms, initially desgined for one that has broken clips, and as such the clips need to be broken off to fit into this mounting plate.
A mounting plate that uses the clips can be made upon request.
Printed in 0.20 mm layer height with 20% infill. Best printed face down.
Requires countersunk screws to mount. Initially intended for 3.5 x 16 mm countersunk screws. Can be mounted on top or flush with the surface. Needs a 27.5 mm square hole, depending on the mechanism clearance.