1 / 4
RC Tyre Glueing Helper 45degree
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the Model to have the tyre on 45 degrees angle.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Same electrics needed as the Original Model.
Hardware changed:
Needed Screws:
2× M1.6 6mm screw instead of the 10mm
For Lid and Bearing guide 6× M3 8mm countersunk screws
For attaching the Motorhousing to the body 4× M3 10-12mm countersunk screws.
Needed Bearings:
2× 8×4×3mm Bearings
Diameter: 8mm outer, 4 mm inner