Kobra 2 Max X gantry light bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thought its gonna be cool ...and it IS!!!
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 1
- Views
- 292
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Standard Digital File License
After some extensive trial and error i ended up with this 48cm (!!!) long light bar for the X gantry on Anycubic Kobra 2 Max ( Kobra 2 Neo, Kobra 2 Pro and Kobra 2 Plus ones are on the way ) .
No additional screws needed, the LED bar bolts directly to both of the external(or internal? ) X gantry screws on the back of the ALU bar . Check photos.
For my daughters fun i put some RGB 5050 5V LED strip from a DIY kit i found in the chinese bazar. The groove is 12 mm wide , able to accommodate most of the conventional LED SMD strips out there.
Cabling goes through the main X gantry/Extruder cable weave down to one of the USBs on the front panel of the printer, in my case stopping at the IR remote control eye stuck on my storage drawer ( https://www.printables.com/model/1226163-tray-storage-for-anycubic-kobra-2-max ). In case you feel adventurous you can go with generic 24V LED strip from Amazon, something like this:
https://a.co/d/2QUfYvU . This will need additional cabling to be plugged directly to the main board and https://www.printables.com/model/771933-anycubic-led-button-mod-for-kobra-2-series-printer for neat install .
Waiting on some more specs for the smaller version of the model in order to release 2 more ready-to-print files, but i think you guys can handle the challenge if you want to…
Hope you all like it, waiting for some feedback!
Happy printing!