Cardinal on a Cross Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cardinal sitting on a cross in the woods
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 38
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed it at the 150mmx150mm size. I originally did the picture in Hueforge at 200mmx200mm but wanted it a little bit smaller.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6.1
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Coffee Transmission Distance: 3
PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Orange
At layer #15 (1.28mm) swap to Coffee
At layer #17 (1.44mm) swap to White for the rest.