1 / 2
Motorola Talkabout T5412 Helical Antenna
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement for the original antenna for T5412.
- Rating
- 4 / 5
- Likes
- 3
- Downloads
- 45
- Makes
- 1
- Views
- 226
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I have created it with TPU and 0.6mm nozzle. The 0.4mm nozzle may be a better choice.
I have also uploaded gcodes for 0.6mm/0.4mm/TPU/PLA for MK3S+. I you are interested in other combinations let me know. You may also create your own based on the .3mf file.
When slicing by your self here are hints:
- make sure to relocate the seam to the back
- thicken perimeters a little while leaving infill at 15% - at least it is perfect for TPU
- use supports but exclude support from the inside the tube - otherwise it will be difficult to remove them later
Good luck, let me know if you have any problem with printing it.
