Flat rail for SMD Component Tape Magazine (8, 12, 16mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple modification of the provided rail
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Just the rail with a flat bottom/no angle. Also removed the foam-pocket to make it thin. Simpler to print vertically.
Two versions, stl-file is simply edited in slicer and then exported, f3d and step are done by importing the original, converting to solid and tracing the profile to extrude.
Haven't tested the step file, the stl is in use in the photo. Unfortunately the export removed the “connectors” which I had added, but you can just scale one of them to longer height and make a cut to add any connectors you like. Mine are/were simple dowels that are friction fit for filament, no need to print small cylinders since the plastic already comes in a small (but really long :D) cylinder. Just remove/set as nonprint the “dowels” and cut pieces of filament to use. I suggest finetuning the fit with a separate test piece