CALIZ | Woven Table Lamp E14 & E26/27

CALIZ | Woven Table Lamp E14 & E26/27

A table lamp that works great with large "Edison filament" light bulbs.

This lamp is also available in taller version.

UPDATE:
You can now pick between 2 weave patterns.
• V1 prints in regular mode.
• "V2_shade-full" prints in vase mode, without any visible seame.
Make sure to check out the detailed print settings.

It works with E14 &E26/27 light bulbs.
There's a version of the base for each type.

To add some weight to the base, you can fill-up the screw-in container with clay, gravel or sand, and screw it inside the bottom of the base.
It makes the lamp very stable, gives it a more premium feel.

The woven pattern (printed here in PETG) diffuses the light beautifully.
It can be printed by any printer with a classic 0.4mm nozzle.

Happy printing!

DIMENSIONS (shade) Ø190mm H 209mm

DIMENSIONS (base) Ø116mm H 116mm

3D PRINT SETTINGS:
All STL files are already oriented properly.
You need to print 4 parts:
- one shade
- one base
- one "weight container" made of 2 parts

THE SHADE:
The shade prints upright.
2 versions available: V1 and V2.
V1 prints in regular mode, V2 in vase mode.

V1 SHADE:
• Layer height: 0.3 mm (no less, no more)
• Line width: 0.5mm (for a 0.4mm nozzle, so as to extrude a bit more material and achieve a cleaner weave)
• Wall line count (perimeter walls): 2
• Build adhesion type: None
• Supports: None

V2 SHADE:
The 3D model is full. This is normal.
You need to "empty it" by printing it in vase mode (spiralize outer contour / spiral vase).
Same settings for 0.4 to 0.8mm nozzles as detailed below:
• 0.4mm layer height
• default 0.85mm line width
• 8 bottom layers (adjust if using another layer height)

For Bambu Studio users, make sure to:
• turn OFF "slow down for overhangs"
• set "wall generator" to "arachne".
• turn off the "scarf mode" in the seam settings.

THE BASE & WEIGHT CONTAINER:
No particular tricks for the base.
I used 0.2mm per layer and 15% infill.

Happy printing!