Tripod Mount for ZSA Voyager Keyboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I didn't want to pay $90 for the factory mounts, so I designed my own 3d-printable version.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 494
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
The black mount featured in the cover photo is the newer slim model using heat-set inserts.
For the other red model I used embedded 7/16 nuts with ¼ x 20 thread, for the tripod connection, instead of heat-set inserts, in case you don't have, or don't want to use heat-set inserts.
The included gcode is for the model using all hex nuts, and includes pauses for inserting the nuts, the m3 ones first, followed by a second pause for insertion of the ¼ nut. If the gcode doesn't work with your printer, you will have to add pauses in your slicer to insert the nuts during printing.
I fixed the double-pause issue in another attached model, that should only require a single pause during printing, but that model has not been printed or tested by me.
I printed in PLA on a Prusa MK4S with the standard Prusament PLA defaults. If using the heat-set inserts you might want to add some extra wall thickness to the hole for them via the slicer, ‘cause I didn’t design add'l hole thickness into the part.
Materials:
8 x m3 x 8mm tapered flathead screws
8 x N52-3/8 D x 1/8" H #4 Countersunk Hole Ring Magnets
Optional:
2 ¼ x 20 threaded heat-set inserts, short version. I designed for inserts from CNC Kitchen. You might need to modify if using something different.