DIY Resin curing station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to hold the UV light for a DIY resin curing station
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I made this to hold the UV light found at amazon here. It is a simple bracket to install in any plastic container.
Easy instructions:
Step 1: get any platic tote and fully tape off the inside with aluminum tape found here or similar.
Step 2: Mark off the screw holes and light opening on top cover and cut out
Step 3: use 5M x 10mm screw and connect the top to the bottom sandwiching the lid.
You can get a bakers rack to hold the models up and if you want rotation of your model you can get a little UV turntables.
Parts:
M5 Screw x4
Plastic container of your choice