1 / 1
Lane Change Button for Scalextric ARC Air controller to convert to ARC Pro Digital or oXigen Digital wireless controller
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
add the missing plastic button!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on the simple design slot.it had sold on Shapeways that is no longer available. Modified for easier printing on filament printers. Hexagons are the bestagons!
Print as is in any material, and discard the little triangular support piece.
Carefully drill a 4mm hole right in the center of where the button should go. Best to remove the button PCB as you'll need to drill through two walls of plastic. You may need to use a slightly larger drill bit, or file the hole to ensure that the button moves freely so that it doesn't get stuck.