Bold Circle Ring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is my first ever CAD design, made in FreeCAD. It was originally just for my mum but thought I'd share it here.
Given its simplicity, you can print it with a 0.4 nozzle. As for layer height, the only part of the ring that is affected by it is the actual finger part, which is not exposed when wearing it. Therefore you can print this with a 0.28 mm layer height, the only effect that will end up having is MAYBE some discomfort, although I have not experienced that while wearing it for two days consecutively. However, there are no massive gains, just a few minutes, from printing it at this layer height, so in almost all instances a 0.2 mm layer is preferred.
Ring Size:
- Diameter: 19.0 mm
- US: 9
- UK: R½
- FR: 59¼
- DE: 19
Print settings:
- Layer Height: 0.2mm (recommended) or 0.28mm (if you want to save a few minutes, though it may slightly affect comfort)
- Infill: 10%
- Supports: Not required, but tree supports are encouraged
- Material: PLA, PETG, or ABS (PLA recommended for easy printing)
- Print Time: 15 minutes @ 600mm/s