Yaesu FTM-150R Compatible Desktop Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple stand that tilts the whole radio (Not just the face) up and provides a place for the Mic to attach.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 78
- Makes
- 3
- Views
- 454
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Just got my Yaesu and realized I needed a stand to tilt the radio up, and provide a place for the microphone to attach. I came up with this simple model. This holds the entire radio and not just the face which is what I wanted. I printed this with 5 perimeters which is probably unnecessary but I wanted to ensure the mic stand was going to be strong enough. There are a line of small vent holes in the back to ensure adequate airflow which are also probably unnecessary.
I thought the rounded corners would be enough but this did end up warping very slightly as it printed. It might be worth adding a brim to this model to keep the corners down.