Coconut Plant Pot Tray Dish Stand Thingy-Mabop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple clean 2 piece print to use with a coconut half to make a dish (I'm using for plants).
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
I can't be the only one that has admired coconut shells cut in half..right?
well if so, did you know they can be a quite nice bowl for all sorts of goodies?
Even as a plant pot!
Coconuts have two halves, one has holes (which is well rounded) and the other slightly pointed side. Because of this I found myself trying stands with varying heights and diameters. Not only do the different heights change the esthetics, but you can also flip the stand upside down to show or hide the ring when using the “plant drain dish”.
Low Mid High= Heights
Loose= smaller diameter that fits loosely in the tray
Fitted= larger diameter that fits tightly in the tray
Good luck splitting coconuts.
Be careful, some are easier than others.
Enjoy.