1 / 1
Belt Winder Cover for Roller Blinds
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A winder cover with a narrow slit, so that it can be installed without undoing the belt. Default hole distance is 130mm.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 43
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is a simple belt winder cover with a hole distance of 130mm. When it's installed, the little opening where the belt is slid through during installation is barely noticeable. FreeCAD file included in case you'd like to adjust it to different beltsizes, screws etc. Print face down and use supports or a sacrificial layer for the screwholes. |  |