Handpresso Pump Espresso Maker holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€10.83 – €13.23 net (excluding VAT)
For file: handpresso_halter_0.2mm_PLA_MK3S_13h27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €12.03 excluding VAT (range midpoint).
- Weight reported by the author
- 121 g
- Print time reported by the author
- 13.45 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
IKEA Skadis compatible holder for the Handpresso wild manual outdoor espresso maker
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed this holder to store my Handpresso Espresso Maker and the two filters separately so that the inside of the espresso maker can also dry when in the holder.
Printed in PLA with only a few supports for the hooks on the rear side and the bottom notches
In order to increase the friction between the IKEA Skadis board and the holder I incorporated small shallow pockets on the rear side for small and thin (~1,5mm; I used this one) soft rubber pads so the holder will not move when the Handpresso and the filters are removed from the holder.