Portafilter Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.28 – €2.79 net (excluding VAT)
For file: siebtraegerhalter_0.2mm_PLA_MK3S_2h51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.54 excluding VAT (range midpoint).
- Weight reported by the author
- 25 g
- Print time reported by the author
- 2.86 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holder for 58mm Portafilters
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 31
- Makes
- 1
- Views
- 259
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Holder for 58mm standard portafilters and portafilters for the Bezzera espresso machines with twisted bayonet noses, this should also fit portafilters with 3 noses type bayonet.
In order to increase the friction between the IKEA Skadis board and the holder I incorporated small shallow pockets on the rear side for small and thin (~1,5mm; I used this one) soft rubber pads so the holder will not move when the portafilter is removed from the holder.