Coffee Leveler Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.74 – €5.79 net (excluding VAT)
For file: leveler_halter_0.2mm_PLA_MK3S_5h47m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.27 excluding VAT (range midpoint).
- Weight reported by the author
- 55 g
- Print time reported by the author
- 5.79 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holder for coffee leveler for 58mm Portafilters
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
To prevent scratching the leveler I have chosen a 2-piece design with an inner part made of TPU. This inner part is not glued to the holder but only inserted. The leveler does not rest on the bottom surface of the insert, but on 5 small circumferential distributed support pads which also act as anti twist features ensuring correct positioning of the insert.
In order to increase the friction between the IKEA Skadis board and the holder I incorporated small shallow pockets on the rear side for small and thin (~1,5mm; I used this one) soft rubber pads so the holder will not move when the tamper is removed from the holder.