STAR TREK badge beads / Perlen (two variants!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For Fans of Star Trek, and fans of this fans :) Nice bead, you see the color of the cord inside the star. (incl. STEP)
- Rating
- 0 / 5
- Likes
- 199
- Downloads
- 354
- Makes
- 0
- Views
- 836
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Standard Digital File License
There are two models, one is flat for easy printing. The other model is not flat, so you should print it standing, it gives a better look.
1, Flat model: easy to print, lying on the plate (the right one in the photo).
2. Not flat: Print it standing, use layer 0,1-0,15mm for a very good finish and brim (Schürze) for a good bed adhesion. (the edges are cut for a better printing)
For both models:
The hole for the cord is 4,5mm. The model size is 25 (26)x17x8 mm. The yellow one in the photo is for 3mm cords (67%).
If you want to change the size, use the rule of three. E.g. If your cord is 3,5mm the scale factor is: 3,5/4,5 = 0,7777 = 77,7 %.
You can also use the STEP-files to make changes in your CAD!
Enjoy it!