1 / 10
AntiFog Device
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of https://www.printables.com/model/834020-anti-fog-device
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 44
- Makes
- 0
- Views
- 470
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of https://www.printables.com/model/834020-anti-fog-device
Use backplate from the original design.
- USB-C from https://fr.aliexpress.com/item/1005007402654029.html
- Regulator from https://fr.aliexpress.com/item/1005006140564754.html
- Also added some protection to the 18650. So it should not goes below critical voltage in theory. https://fr.aliexpress.com/item/1005006607851467.html
- Pouch from https://fr.aliexpress.com/item/4000990688224.html
- Silicone tube from https://fr.aliexpress.com/item/1005005311555646.html
- Tube cover https://fr.aliexpress.com/item/1005004277133486.html or https://fr.aliexpress.com/item/1005006586712980.html
- Fan from https://fr.aliexpress.com/item/1005003371996395.html
- 3mm plexiglas rod used to see the charging light from https://fr.aliexpress.com/item/1005005626315979.html
- Lipo wire connector to be able to measure the remaining voltage from https://fr.aliexpress.com/item/1005007528167524.html
- With my lipo tester from https://fr.aliexpress.com/item/1005002186957150.html
Differences of the remix compared to the original
- Tubes output to the top instead of the sides
- 2 rods to fix the fan are 100% filled to be stronger
- Failed attempt to have the hole usb-c compatible (you will still need a bit of sanding etc)