Easter chick kinder surprise egg
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kinder Surprise egg holder
- Rating
- 0 / 5
- Likes
- 43
- Downloads
- 114
- Makes
- 0
- Views
- 662
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Spring & Easter
- License
- Creative Commons — Attribution — Share Alike
modified model for nice appearance of view layers
Print Prusament PLA OhMyGold
PEDESTAL print
0.15mm structural
default profile
TWO VERSIONS OF THE BASE WITH A SLOT WIDTH OF 4.8MM AND 4.9MM. I PERSONALLY PRINTED 4.8MM, THE SECOND VERSION IS WITH A TOLERANCE OF 0.1MM
The chick MODEL consists of two parts, with a hole and a pin. The hole has a size of 10mm and the pins have a tolerance of 0.0_0.1_0.2_0.3mm. I printed mine with a 0.0mm tolerance, I recommend printing it with a 0.1mm tolerance.
Chicken
Print 0,2 mm structural
default profile
added hole tolerance test model
I fixed the model with superglue, with the right tolerance it is not necessary, but to be safe I glued the models
