1 / 2
Gothic Eye Bead - Filament waste Friendly
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gothic inspired bead, printable in multicolor without purging at every layer.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
Gothic Bead to add a nice accessory to your sweaters, made to be easy to print in multicolor even on single filament printers.
Print Settings
- 0.12 Layer height
- 2 Wall loops
- 15% Rectilinear Infill
- 3mm Outer brim width
- 0.15mm Brim-Object Gap
→ If you choose to assemble-print the main body, set pauses at layer 17 and 80 to place the inside plates and turn off the fan for the first layer after you resume. Print setting are the same for every piece.