Mini Buddha Pearls
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.09 – €0.12 net (excluding VAT)
For file: BuddhaPearl 1_B_0.2mm_PLA_MK3S_7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mini Buddha Pearls for necklace or bracelet
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
EN:
Buddha mini beads for attaching to twine or a thin elastic band, as a necklace or bracelet.
Size: approx. 10mm wide, each with 1.5mm holes. As you will probably need several, I have prepared a dozen.
Material: PLA
Layers: 0.2mm, (or 0.1mm)
Supports: recommended at the base (example see .gcode files), (already marked in 3.mf file).
(do not forget to switch on the supports). By the way, if you make one or more copies in PrusaSlicer, the painting supports will also be copied. You therefore do not need to make them again.
see also: https://www.printables.com/model/1240374-buddha-beads
uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
DE:
Buddha-Mini-Perlen zum Anbringen auf Zwirn oder dünnem Gummiband, als Halsband oder Armband. Da man wahrscheinlich mehrere braucht, habe ich ein Dutzend vorbereitet.
Größe: ca 10mm breit, mit jeweils 1.5mm Löchern.
Material: PLA
Schichten: 0.2mm, (oder 0.1mm)
Stützen: empfohlen an der Basis (Beispiel siehe .gcode-Dateien), (in 3.mf-Datei bereits darauf eingezeichnet).
(vergessen sie nicht die Stützen einzuschalten). Übrigens wenn Sie im PrusaSlicer eine oder mehrere
Kopien anfertigen, kopieren sich auch die Aufmalstützen mit. Brauchen Sie daher nicht nochmals anzufertigen.
Siehe auch: https://www.printables.com/model/1240374-buddha-beads