1 / 5
Planetary Gear WDT Tool for Breville Barista Express — image 1
1 / 5

Planetary Gear WDT Tool for Breville Barista Express

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Height Adjustable Planetary Gear WDT Tool

Rating
0 / 5
Likes
6
Downloads
18
Makes
0
Views
449
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

Here's a planetary gear WDT tool I made to suit the Breville Barista Express. Designed to help with even espresso distribution

Key Features

  • Adjustable Height - using Part E with up to 20mm of travel. You Can also cut the WDT needles down to length if needed
  • Simple Planetary gear mechanism for consistent and fluid movement each time
  • Base (Part G) can also double up as a tamp base.

The WDT needles themselves are 3D printer nozzle cleaners, cut to length. They're cheap can be found on aliexpress or amazon and simple to replace if they get bent or gunked up. Once assembled, twist the Part A collar and the twisting motion will move the WDT needles in two lots of circle motions.

 

BOM:

2x M4 screws, around 40mm long (or anything long enough to secure Parts A, B, and C)

9x nozzle needle cleaners (AliExpress, Amazon, etc.)

 

What to Print:

All files, 1x each

 

Assembly Instructions:

Part C1: Thread 5 nozzle needle cleaners through from the side where the holes are wider and recessed. This helps seat the needle heads flush and prevents them from pulling through.

Part C2: Do the same, using 4 nozzle cleaners.

Main Assembly: Stack Parts A, B, and C1/C2 together using the two M4 screws. Refer to the diagram for orientation.

Depth Adjustment: Thread Part E onto Part D. Part E acts as the adjustable collar to set your needle depth.

Leave enough thread exposed on Part D and screw it into Part F.

Now you can join the top and bottom halves together.

Part G is your base—works as both a stand and tamper station.

 

optional: Part A “Alternative ECG” design. Untested* let me know if you do and share some pics!

 

If you end up printing or remixing it, I’d love to see what you come up with.. Happy WDT'ing 

Tags