1 / 2
LK4 Pro Inline Filament Run-out Sensor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For direct drive converted LK4's that still need to use the stock filament run out sensor.
- Rating
- 4 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 1
- Views
- 78
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Intro Notes: I converted my Longer LK4 Pro to direct drive and needed a way to use the stock filament run out sensor with my direct drive adapter. This allows you to mount the run out PCB and switch to this housing, connect a compression fitting and connect it to a PTFE tube.
Print Parameters: 0.4mm Nozzle, 10% Infill, 0.2mm Layer Height, 3 Vert.&Horz. Shell layers.
Additional Hardware:
LK4 Pro Filament run out sensor and its two fasteners.