1 / 8
Filament Wall Mounted Rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A storage option for filament rolls. As connection I used 15,5x1,5mm aluminum tube which can be bought in the Globus…
- Rating
- 4.833 / 5
- Likes
- 81
- Downloads
- 735
- Makes
- 5
- Views
- 6,461
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A storage option for filament rolls. As connection I used 15,5x1,5mm aluminum tube which can be bought in the Globus hardware store. With a length of one meter and an infill of 35%, the hold is still very stable. At lengths over a meter you should perhaps still set an angle in the middle. For attachment to the wall I have provided holes for 4.5mm countersunk screws.
Print Settings
Printer:
RAMPS 1.4
Rafts:
No
No
Resolution:
0.2
35%
Category: 3D Printer Accessories