Federal Signal STH-10 Horn Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Federal STH-10 horn spacers. These are horn spacers to keep the horns secure and spaced properly.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
Federal Signal STH-10 Siren Horn Spacer
This spacer is designed for Federal Signal STH-10 sirens. It fits between the horns and is to be bolted down, so it needs to be strong and durable. This spacer fits a 5/16" bolt.
Recommended Print Settings:
Filament: PETG (for strength and weather resistance)
Layer Height: 0.2mm (or 0.28mm for faster prints)
Perimeters: 3 or more
Infill: 50% or higher (Grid or Gyroid works well)
Brim: Recommended for bed adhesion
Note: Be sure to have good bed adhesion. Two of my spcaers flipped over near the end and the print had to be restarted due to not very good bed adhesion. Use a brim or adhesive (like a glue stick) if necessary.