Stargate MK-2 Naquadah Generator, Prop

Prop of an advanced power generation unit reverse-engineered from alien technology, and widely used by the Stargate Atlantis expedition. The generator is powered by a small amount of the mineral naquadah, and runs cleanly with a significant output of energy. The Mark 2 is capable of achieving 600% of the power output of the Mark I, operating in a state of barely controlled overload and is quickly depleted. Never-the-less, two of these devices can power an Ancient Control Chair for a limited number of uses, which normally requires a Zero Point Module to operate.

Model Info:
I designed this model to be printed on a printer with a print area of 300x300x400 as some parts are quite large. There's plenty of internal space for lights, electronics, batteries, and etc. This model is a Work in Progress because I haven't printed/tested any parts yet. All parts have been uploaded if you want to print one. The inner core part was to hard to design based on the pictures I could find, so I based my version on a Borg cube texture.

Parts To Print:
1x MKII Gen C-1 (optional MKII Gen C-1-plain)
1x MKII Gen C-2 (not needed if using the optional part)
1x MKII Gen L-1
1x MKII Gen L-2
1x MKII Gen L-3
2x MKII Gen L-4-a (optional MKII Gen L-4 blank)
6x MKII Gen L-4-b (not needed if using the optional part)
6x MKII Gen L-4-c (not needed if using the optional part)
1x MKII Gen L-pins
1x MKII Gen R-1
1x MKII Gen R-2
1x MKII Gen R-3-a
1x MKII Gen R-3-b
1x MKII Gen R-4
1x MKII Gen R-5
2x MKII Gen R-6-a (optional MKII Gen R-6 blank)
2x MKII Gen R-6-b (not needed if using the optional part)
1x MKII Gen S-1-a
1x MKII Gen S-1-b
1x MKII Gen S-2-a
1x MKII Gen S-2-b
1x MKII Gen S-pins
1x MKII Gen T-1
1x MKII Gen T-2
1x MKII Gen T-3
1x MKII Gen T-pins
2x MKII Gen W-1
2x MKII Gen W-2
2x MKII Gen W-3