1 / 4
Rolling Pin Stand / Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
We needed a small footprint stand to get the rolling pin onto the shelf with the small appliances. This was the result. Be careful removing it from the build plate, as it is susceptible to bending. The rolling pin's maximum diameter can't exceed 40mm.
- 10% Infill
- 0.2 Layer Height
- Wall Thickness 2
- Top shell pattern: Archimedean Spiral
- No supports needed
- 10mm Brim (Probably fine with 5mm, but I have bed adhesion issues at the moment.)