1 / 3
Philips Hue LED lightstrip curved holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Curved holder fitting the Philips Hue LED lightstrip. Used 4 lighting my 3D prints from the ceiling inside a LACK setup.
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 237
- Makes
- 1
- Views
- 1,632
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Printed in orange Prusament PETG (of course ;-)), with standard 4mm nozzle, 0.25mm DRAFT.
Selected the new „snug“ supports in Prusaslicer which worked great.
Fits standard 3,5mm wood screws, I used the short 16mm ones, which are plenty strong.
In my setup only the inside curve was needed, but I made an outside curve as well just in case.
Enjoy!