1 / 3
Wall mounted kitchen roll holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A kitchen roll holder to mount on a wall secured by gravity
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 77
- Makes
- 0
- Views
- 409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I wanted a kitchen roll holder that could take a bit of punishement as it'd be living in a workshop. It needed to be vertically mounted and secured as its going to attach to the back of a door.
This model has a slide part which utilises gravity to clamp the roll in place and keep it centered.
You will need:
- 2x 50-55mm m4 bolts or screws
- 3x 20-25mm m3 screws for wall mounting
I printed it with 4 walls for additional robustness. The lower section is laid on its back with supports for the slot, the top section is laid on its back also.