1 / 2
55mm CO2 tube 2020 / 2040 mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
55mm CO2 tube mounts. 2mm rubber required between the tube and the mount.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 16
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've been using these CO2 tube mounts for years (as the pcture shows the are dirty as hell). I thought they might be useful for others too. Can be used for 2020 and 2040 extrusions. M5 screws required. The inner size is larger than the tube itself allowing the use of 2mm rubber strips or similar material protecting the glass tube. If you use the mount, DO NOT OVERTIGHTEN the screws! For me they never required adjustment, so they can hold properly even with a softer grab.
Recommended ASA, ABS or other high temp material.