Hoover Smart Wash Carpet Scrubber Brush Cover Replacement Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pins broke off of the brush cover on our carpet cleaner. Figured printing something would look better than duct tape.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
2 black pieces pictured on either side of the hose. Does the job of the blue piece shown, with the pins it normally attaches to on the clear piece broken off. Printed using a 0.6mm nozzle w/ 15% infill. Added fuzzy skin to increase friction, but unsure if it really did much. Printed along with a mirror copy for the other side. Works by flexing to force a seal on the gasket. Cube attached should wedge in to help hold it in place. Feel free to make it your own. OnShape document is public, look up hoover smartwash.
