Navádzacia kladka - filament guide pulley
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Navádzacia kladka s držiakom na vstupe do hadičky - Guide pulley with holder at the tube entrance
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 21
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Celkové prepracovanie pôvodneho zdroja a umiestnenie navádzacej kladky v osi vstupu do hadičky. Navádzacia kladka je teraz umiestnená priamo pred vstupom do hadičky, aby sa uľahčilo vťahovanie filamentu. Držiaky su každý samostatne L a R. Umiestni si ho podľa potreby na svojom ráme XL. Dlhší pre najspodnejší a kratší na stredný, tak ako to vidíš na obrázkoch. Do kladky je použité bežné ložisko 608ZZ (D22 x d8 x w7).
Ak sa ti model páči daj like a keď ho vytlačíš pridaj fotku a ohodnoť hviezdičkami.
Ďakujem.
Total redesign of the original source and placement of the guide pulley in the axis of the tube entrance. The guide pulley is now located directly in front of the tube entrance to make it easier to pull the filament. The holders are each separate L and R. Place it as needed on your XL frame. Longer for the bottom one and shorter for the middle one, as you can see in the pictures. The pulley uses a common 608ZZ bearing (D22 x d8 x w7).
If you like the model, give it a like and when you print it, add a photo and rate it with stars.
Thank you.